炭/炭复合材料抗氧化涂层厚度的光学测量

选用A,B,C,D4种炭/炭复合材料试样进行抗氧化涂层厚度的光学测量研究。其中:试样A,B孔隙度相同,均为15.85％,对其涂覆粒径分别为1μm和10μm的B_4C涂层;试样C,D孔隙度分别为13.52％和16.78％,对其均涂覆粒径为10μm的B_4C涂层。然后通过金相光学测量其涂层厚度,在抗氧化涂层厚度的计算过程中,对试样组织的内部未渗入抗氧化涂层的孔隙进行图像处理。结果表明:当试样孔隙度相同时,涂层材料粒径越小,其涂层越厚;当抗氧化涂层材料粒径相同时,试样孔隙度越大,涂层越厚。     

乙烯裂解炉结焦抑制技术进展

在乙烯装置中，裂解炉结焦是制约装置运行的重要因素。在查阅大量文献基础上，系统地总结了国内外在抑制结焦技术方面的成果和进展，对我国开发结焦抑制技术、提高乙烯装置竞争能力，提出了建议。     

Yttrium sol–gel coating effects on the cyclic oxidation behaviour of 304 stainless steel

The present results reveal the interest of sol–gel coating technique to improve 304 steel high temperature oxidation resistance. An yttrium sol–gel coating appears to enhance the oxidation resistance during isothermal oxidation test, to decrease widely the oxide weight gain and to reduce the initial transient oxidation stage generally observed in the case of blank steels. Moreover, the experimental results confirm that yttrium sol–gel coating also plays a significant role on the cyclic oxidation behaviour of the 304 steel. In fact, the yttrium addition promotes remarkably the prolongation of the period during which the oxide scale still remains adherent to the substrate.     

n-Al2O3/Ni复合镀层的组织与滑动磨损性能研究

用电刷镀技术制得了镍基n-Al2O3复合镀层，并对镀层的滑动磨损性能进行了试验研究。纳米复合镀层的表面形貌比较细腻，镀层中纳米粒子分布均匀，与基质金属结合紧密。镀层显微硬度达到HV700，比快速镍镀层提高约40％。滑动磨损试验结果表明，随着纳米粒子含量的增大，镀层的耐磨性提高，摩擦系数也呈增大趋势；但当镀层中n-Al2O3粒子的超过2.56%(质量分数）时，镀层的耐磨性显著下降。纳米复合镀层的磨损机制以疲劳磨损为主，而快速镍底层以粘着磨损为主。     

石英晶体监控法镀制高精度光学薄膜

讨论了石英晶体监控法在光学薄膜镀制过程中的应用原理。通过与常规的光学监控法镀制的膜层相比较．证实了石英晶体监控法有助于提高光学薄膜的光学品质。试验表明所镀膜层的光学性能优异，在光通信和激光器等领域具有广阔的应用前景。     

Al2O3基耐磨陶瓷涂层的燃烧合成与应用

介绍了燃烧合成表面涂层技术的基本原理 ,开发了相应的制备工艺 ,并在此基础上研制了内覆陶瓷涂层的复合钢管、弯管及弯头。陶瓷涂层主要由α Al2 O3相、部分FeO·Al2 O3相和 3Al2 O3·2SiO2 相组成 ,采用添加剂可以有效提高熔体的流动性 ,使陶瓷的凝固和结晶过程得到进一步控制 ,有助于减少孔隙 ,提高陶瓷涂层的致密度。现场应用试验表明 ,涂层具有较好的耐磨性能 ,可使设备的使用寿命大为延长     

镁合金表面喷铝防腐蚀层的微观组织分析

在AZ91D镁合金表面热喷铝，用以提高其表面的耐腐蚀性能。采用SEM，EPMA等方法对AZ91D表面喷铝扩散层的组织进行了仔细的观察与分析，发现在防腐蚀层上有大量的Mg17Al12相存在，且呈决状及非连续片状分布。经显微硬度测定，喷铝层硬度较镁合金基体高；腐蚀后这种相凸出于基体，比镁合金基体有较好的耐腐蚀性能。     

The use of natural essential oils as antimicrobial solutions in paper packaging. Part II

We have assessed the antimicrobial, vapor-phase activity of the following natural essential oils (EOs) when used in paraffin-based “active coatings” for paper packaging materials intended to come into contact with foods: clove (Sygzium aromaticum), cinnamon (Cinnamomum zeylanicum), and oregano (Origanum vulgare) EOs, and cinnamaldehyde-enriched cinnamon EO. To our knowledge, this is the first time that such an approach has been presented for consideration by the scientific community.     

Thermal analysis of a ceramic coating diesel engine piston using 3-D finite element method

In this study, firstly, thermal analyses are investigated on a conventional (uncoated) diesel piston, made of aluminum silicon alloy and steel. Secondly, thermal analyses are performed on pistons, coated with MgO-ZrO₂ material by means of using a commercial code, namely ANSYS. Finally, the results of four different pistons are compared with each other. The effects of coatings on the thermal behaviors of the pistons are investigated. It has been shown that the maximum surface temperature of the coated piston with material which has low thermal conductivity is improved approximately 48% for the AlSi alloy and 35% for the steel.     

碳/碳复合材料MoSi2/SiC涂层在动态氧化环境下的性能研究

为了考察MoSi₂/SiC防氧化涂层体系在动态氧化环境下的防护能力,对碳/碳复合材料MoSi₂/SiC涂层试样在1100~1500℃下进行了高温燃气高质流冲刷环境下的氧化试验。结果表明,在1100~1500℃的燃气动态环境下,具有稳定的氧化失重速率,氧化失重曲线近似呈直线关系,氧化失重和氧化失重速率均随着氧化温度的升高而降低,表现出该涂层抗高质流冲刷和氧化的能力随温度的升高而提高,在该温度区间内,随着温度的升高,具有更优异的抗氧化和抗高质流冲刷的能力。